FT750-25
  • 12-volts
  • 25 Group Size
  • 120 mins @ 25 amps
  • 21 mins @ 75 amps
  • 51 AH @ 5HR
  • 64 AH @ 20HR
  • 900 CA @ 32°C
  • 750 CCA @ 0°C
FT750-25

FT750-25 High Capacity Dual Purpose AGM Battery

Cycling Capacity
20 hour rate 64 Amp Hours
Reserve Capacity
@ 25 Amps 120 minutes @ 75 Amps 21 minutes
Mechanical Specifications
Group Size 25
Terminal Type AP
Total Height 8.66" (220 mm)
Height 7.95" (202 mm)
Width 6.85" (174 mm)
Length 9.45" (240 mm)
Weight 49.2 lbs (22.3 kg)
Case Type ABS Plastic - Flame Res Rating UL94-HB
Discharge Table (Constant Current)
Time Amps Rate
20 hr 3.2 0.05 CA
10 hr 5.8 0.1 CA
8 hr 7 0.13 CA
5 hr 10.4 0.25 CA
3 hr 16.5 0.33 CA
2 hr 21.6 0.5 CA
1 hr 36 1 CA
Electrical Specifications
Nominal Voltage 12 Volt
Capacity @ 100 hour rate 70 AH
Capacity @ 20 hour rate 64 AH
Capacity @ 10 hour rate 57 AH
Capacity @ 5 hour rate 51 AH
CCA 750
CA or MCA 900
Short Circuit Current 2480 Amps
Internal Resistance 5m Ω
Charge Voltages
Battery Voltages
Charge Stage 12V 24V 36V 48V
Bulk 14.7 V 29.4 V 44.1 V 58.8 V
Absorption 14.7 V 29.4 V 44.1 V 58.8 V
Float 13.6 V 27.2 V 40.8 V 54.6 V
TC Factor: -4mV/°C/cell
Temperature Range Specifications
Condition Recommended Maximum
Storage -15°C to 50°C -40°C to 71°C
Operation -15°C to 40°C -40°C to 71°C
Charge with TC -15°C to 50°C -40°C to 71°C
Charge without TC 0°C to 40°C -15°C to 50°C
Terminal Torque Specifications
Terminal Type ft-lbs in-lbs Nm
AP | DT (AP) | M6 | M6M (stud) | TP07 (AP) | TP08 (AP) 4.2 - 6.5 50-75 5.6 - 7.14
FR45 6.0 - 7.10 70-95 7.9 - 10.6
M8 | LT 7.1 - 8.5 85-100 9.6 - 10.12
DT (stud) | M10M (stud) 9.2 - 10.9 110-130 12.2 - 14.5
  Name Size
Charging Instructions Icon Charging Instructions 1.1 MB
Installation Manual Icon Installation Manual 1.7 MB
Spec-sheet Icon Spec-sheet 1.6 MB
Product Menu