FT100
  • 12-volts
  • 8 mins @ 25 amps
  • 6.5 AH @ 5HR
  • 8 AH @ 20HR
  • 155 CA @ 32°C
  • 100 CCA @ 0°C
FT100

FT100 High Capacity Dual Purpose AGM Battery

Cycling Capacity
20 hour rate 8 Amp Hours
Reserve Capacity
@ 25 Amps 8 minutes @ 75 Amps 0 minutes
Mechanical Specifications
Group Size
Terminal Type M6
Total Height 4.02" (102 mm)
Height 4.02" (102 mm)
Width 3.39" (86 mm)
Length 5.43" (138 mm)
Weight 6.6 lbs (3 kg)
Case Type ABS Plastic - Flame Res Rating UL94-HB
Discharge Table (Constant Current)
Time Amps Rate
20 hr 0.5 0.05 CA
10 hr 0.8 0.1 CA
8 hr 0.9 0.13 CA
5 hr 1.4 0.25 CA
3 hr 2.3 0.33 CA
2 hr 3.1 0.5 CA
1 hr 5.6 1 CA
Electrical Specifications
Nominal Voltage 12 Volt
Capacity @ 100 hour rate 9 AH
Capacity @ 20 hour rate 8 AH
Capacity @ 10 hour rate 7 AH
Capacity @ 5 hour rate 6.5 AH
CCA 100
CA or MCA 155
Short Circuit Current 448 Amps
Internal Resistance 27.5m Ω
Charge Voltages
Battery Voltages
Charge Stage 12V 24V 36V 48V
Bulk 14.7 V 29.4 V 44.1 V 58.8 V
Absorption 14.7 V 29.4 V 44.1 V 58.8 V
Float 13.6 V 27.2 V 40.8 V 54.6 V
TC Factor: -4mV/°C/cell
Temperature Range Specifications
Condition Recommended Maximum
Storage -15°C to 50°C -40°C to 71°C
Operation -15°C to 40°C -40°C to 71°C
Charge with TC -15°C to 50°C -40°C to 71°C
Charge without TC 0°C to 40°C -15°C to 50°C
Terminal Torque Specifications
Terminal Type ft-lbs in-lbs Nm
AP | DT (AP) | M6 | M6M (stud) | TP07 (AP) | TP08 (AP) 4.2 - 6.0 50-70 5.6 - 7.9
FR45 6.0 - 7.5 70-90 7.9 - 10.1
M8 | LT 7.1 - 8.0 85-95 9.6 - 10.7
DT (stud) | M10M (stud) 9.2 - 10.4 110-125 12.2 - 14.0
  Name Size
Charging Instructions Icon Charging Instructions 1.1 MB
Installation Manual Icon Installation Manual 1.7 MB
Spec-sheet Icon Spec-sheet 1.6 MB
Product Menu